Corotech | High Performance Alkyd Urethane Enamel Gloss

Product Details Benjamin Moore Corotech® High Performance Alkyd Urethane Enamel Gloss CV200-78 Aluminum is a heavy-duty industrial enamel designed for interior and exterior use on a wide variety of properly prepared surfaces. The modified alkyd formula is fortified with urethane technology for maximum durability, outstanding gloss retention, and excellent resistance to scratches, impacts, and everyday wear. Its surface-tolerant formulation and superior flow and leveling characteristics produce a smooth, uniform aluminum finish ideal for industrial, commercial, and maintenance applications. Specifications Specification Details Recommended For Use On Previously painted surfaces, ferrous metal, wood, drywall, and other properly prepared substrates. Commonly used for industrial and professional maintenance applications. Key Feature(s) Urethane-modified for maximum durability; hard, scratch- and impact-resistant finish; excellent flow and leveling; superior gloss retention; interior/exterior performance. Interior/Exterior Interior / Exterior Resin Type Modified Alkyd Pigment Type Titanium Oxide Volume Solids (±1%) 43 ± 1% Coverage (Sq. Ft./Gal) 400–450 sq. ft. per gallon Recommended Film Thickness (mils) Wet: 3.6–4.0 mils • Dry: 1.5–1.7 mils Dry Time (77°F, 50% RH) Tack Free: 4 hrs • Recoat: 12 hrs Full Cure 4–6 days Application Temp Range (°F) 50–90°F Application Method Brush, Roller, Airless Spray, or Conventional Air Spray. Airless tip size: .013–.017 with minimum 2200 PSI at tip. Clean Up V701 Brushing Reducer or Mineral Spirits Thinner Do Not Thin Flash Point 104°F (40°C) Sheen / Gloss (@60°) Gloss (80+ units @ 60°) Weight per Gallon 9.8 lbs. VOC Range 438 g/L (3.7 lbs./gal.) Dry Heat Resistance 275°F (135°C) Wet Heat Resistance 150°F (65.5°C) Adhesion (ASTM D3359) Pass 5B Abrasion Resistance (ASTM D4060) 120 mg loss after 1000 cycles (CS-10 Wheel) Salt Fog Resistance (ASTM B117) 500 hours pass over V140 primer (Rating 10, Rust Area 0.00%) Flexibility (ASTM D1737) Pass ¼" (6.35 mm) Mandrel Weathering Resistance 70% gloss retention after 500 hours accelerated weathering (ASTM G53) Chemical Resistance (Non-Immersion) Excellent: Fresh Water • Good: Salt Water, Acidic Salt Solutions, Alkaline Salt Solutions, Neutral Salt Solutions • Fair: Acids, Alkalis, Solvents, Fuels Primer Recommendations Compatible with V110, V114, V130, V131, V132, V133, V140, V142, V150, V155, V160, V163, V175, V180 and other acrylic or alkyd primers. Compliance / Certifications MPI #1 • Meets SSPC #101 & SSPC #108 requirements • Suitable for use in USDA inspected facilities • VOC compliant in Federal, OTC, CARB, CARB07 and other listed regions. Limitations Not recommended for direct application to galvanized steel or aluminum unless primed with V110 Acrylic Metal Primer. Not for immersion service. Do not apply below 50°F or above 90% RH. Do not apply if rain is expected within 12 hours. Storage Temp (°F) 45–95°F Available Colour Aluminum (78) – Do Not Tint SDS SAFETY DATA SHEETS SDS CV200-78 (CA English) TECHNICAL DATA SHEETS TDS CV200-78 (CA English) TDS V200_78 (CA English)